September 02, 2022

Most of the printed samples will see some water-based direct prints with high mesh lines (some up to 110 lines) or some offline pre-printed products. And several well-known domestic machinery and

September 01, 2022

Plate selection of high net cable plate making The printing plate used for high screen printing has a hardness slightly higher than that of the general printing requirements. This is beca

September 01, 2022

Most of the printed samples will see some water-based direct prints with high mesh lines (some up to 110 lines) or some offline pre-printed products. And several well-known domestic machinery and

August 31, 2022

Corrugated paper easily breaks during the process of crimping 1) The gap between the upper and lower pressure rollers is too small Adjust the gap between the upper and lower crimp

August 31, 2022

The corrugated cardboard production line is the basis for the production of cartons in the carton industry. The speed of the production line directly affects the carton plant's hourly rate an

August 30, 2022

In recent years, with the continuous emergence of new equipment, new materials and new technologies, the printing technology of corrugated cardboard is maturing and improving. The carton packagin

August 30, 2022

5.9 Installation of multiple machines The above mentioned are the installation of a single machine. If multiple machines are installed in a workshop, how should they be put in place? Ther

August 17, 2022

(d) The principle of bonding corrugated cardboard: Starch gelatinization process, as shown in Figure 5 starch is composed of 100-10000 glucose combined pol

August 16, 2022

Section 1 Classification of Bad Boards In the production of corrugated board, there will be various kinds of unpleasant phenomena, and som

August 15, 2022

Printing pressure The flexo pressure is generally 1-3 kg/cm2, and the corrugated box printing pressure is generally 1-2 kg/cm2. Because of the pressure

August 13, 2022

With the continuous application of microcomputers, electronic control and other technologies in the corrugated paper box industry, the continuous development of

August 12, 2022

We know that in the past there were three ways to print on corrugated cardboard: 1. Print directly on corrugated board with flexible or rubber; 2. Printed

August 11, 2022

Corrugated board production line is the basis for the production of cartons in the carton industry. The speed of the production line directly affects the hou

August 10, 2022

2. Adhesion Mechanism of Core Paper and Face Paper The adhesion of corrugated core paper and face paper is mainly agglomeration and adhesion of starch adhesives, su

August 09, 2022

1. The working principle of corrugated cardboard single-sided machine. The general structure of a corrugated cardboard single-side machine consists of a pa

August 08, 2022

Zhongshan Keyu Trading Co., Ltd. of Guangdong Province recently developed a new technology for corrugated boxboard printing. This is the use of a sponge liner on

August 07, 2022

3. Thin line processing It is inevitable to adopt some thin lines in the design of corrugated boxes. We must pay attention to these lines. Because in the d

August 06, 2022

Corrugated board adhesive strength depends mainly on the quality of the adhesive and corrugated board production line sizing quality. Adhesive quality The quality of the adhesive

August 05, 2022

Folding carton design features Folding cartons are generally made of folding-resistant cardboard with a thickness of 0.3-1.1 mm and can be transported and

August 04, 2022

Corrugated design needs to be tested in the design of different factors and aspects, designed for different ways, according to the actual industrial methods and

August 03, 2022

The so-called corrugated board moisture content, refers to the water content in the corrugated board (usually expressed as a percentage). The paper material that constitutes the paperboard is, from th